The HTS is the only totally inspectable system on the market.
Our Tolerant Blocks use a colour coding system to minimize incorrect installation. This feature is unique to HTS.
Also, the min and max cable O/D is clearly marked on the block as to which that particular block will seal. Both features enable post inspections of installed transits, increasing the safety and reliability of the installations.
At HTS, safety comes first.
Both the design and manufacture of the HTS are made with safety in mind first.
HTS products are tested, certified, inspectable and don’t generate waste during installation, avoiding the risk of fire due to flammable material and damage to auxiliary systems due to accumulation of waste.
This tolerant block enables a wide range of cable or pipe diameters to be accommodated by a compact range of tolerant blocks sizes. HTS tolerant blocks have 5 sealing faces that are displaced by the sealing process.
This results in a tolerance of up to 4 mm for cable diameters, without any onsite modifications.
This acceptance range is sufficient to accommodate deviations found in cable tolerances.
HTS cable/pipe tolerant blocks have been designed with a degree of flexibility in order to accommodate variances in cable diameters. Additionally this flexibility enables each HTS block size to accept a range of cable or pipe diameters.
Thanks to this tolerance, each HTS tolerant block seals a range of diameters between 3 and 4 mm.
HTS blocks are marked with minimum and maximum cable diameters. E.g. block size 3018 is marked with sizes 18 / 21 to signify that it will accept cable diameters from 18 mm up to maximum of 21 mm.
In practice this means that a small number of blocks can accommodate the full range of standard cable sizes.
There is a less inventory to manage and the installation and inspection procedure is much faster and simpler than competing systems aided by the colour coding system.
HTS WITH JUST ONE LOOK
Under certain site conditions, the general environment and lighting may make it difficult to select the correct blocks.
After installation the colour coding allows the inspector to clearly identify that the blocks have been correctly sized for the cable.
Without colour coding it is impossible to inspect that the system has been installed correctly.
Each individual block has a colour coded face, this ensures that each size and pair of tolerant block halves is always correctly matched to the cable diameter.
This acceptance range is sufficient to accommodate deviations found in cable tolerances.
HTS cable/pipe tolerant blocks have been designed with a degree of flexibility in order to accommodate variances in cable diameters. Additionally this flexibility enables each HTS block size to accept a range of cable or pipe diameters.
Thanks to this tolerance, each HTS tolerant block seals a range of diameters between 3 and 4 mm.
The final element of the frame installation, this is inserted above the compression plate and the bolts tightened to seal the whole frame.
This goes on the top row of blocks, to distribute the pressure from the compression tool and compression system.
